Ultra Bottle Teats Support
Find some answers to the most frequently asked questions about your Ultra™ Baby Bottle Teats
How do I assemble my Ultra bottle?
It’s pretty easy, however it’s essential to making sure that your Ultra bottle works without leaking. If the teat/screw ring are not assembled properly, you may experience leakage. The key to assembling the Ultra bottle is to ensure the indicator under the white screw ring is aligned with the indicator on the silicone teat. (See image below.)
The indicator on the teat is located right near the valve (the tiny circle on the top of the teat.) Start by holding the screw ring upside down with the indicator at the top. Using both thumbs, align the indictor on the teat with the indictor on the screw ring. Once you have aligned these two indicators, insert this part of the teat firmly in the ring and pull the remaining part of the teat through until it ‘clicks’ into place. Ensure you have a tight seal around the circumference of the teat where it meets the screw ring. Then, screw this on to the bottle. Job done.
Can I use Closer to Nature or Advanced Comfort teats on my Ultra bottle?
The simple answer is no, and we’re really sorry about that. Most of our products are made with interchangeable parts to make life as simple as possible. But our new Ultra bottle is so unique that the teats just can’t be swapped with other bottles. You can get a range of Ultra teats though, to suit the needs of your growing baby - slow flow from birth, medium flow from around 3 months, fast flow when they’re ready to really guzzle.
Can I put bottles and teats in the dishwasher?
Of course! Pop them on the top shelf though. As with all white and clear plastic things they can get a bit stained and yucky-looking in the dishwasher (blame that bolognese sauce or carrot soup you had last night). If they do get discoloured there’s nothing to worry about - they’re perfectly safe, they just don’t look as inviting!
Where should the valve be when I’m feeding my baby?
The best place for the valve is at the top, near your baby's nose.
Why is the teat collapsing when my baby is feeding?
This probably means air is not flowing smoothly through your bottle. But don’t worry, it’s easy to fix. You just need to re-open the slit at the tip of the valve by gently manipulating it between your finger and thumb. You should see it open easily, and air can then flow again, preventing the teat from collapsing. To be clear, this shouldn’t happen often. It is due to the specially designed silicone we use - it is so soft and sheer that it can sometimes stick the slit together if the teat isn’t used for a little while. Nothing to worry about:)
It’s worth a quick thought that if your little one is sucking really hard on the teat, they may want more milk than they’re able to get. If that’s the case, you could try a variflow teat or jump up to the next flow rate.
When will my baby be ready for a faster teat?
There’s no single answer to this as every baby is totally different. We do a medium flow teat which most babies are ready for at around 3 months, and a fast flow teat which is usually best from around 6 months. Another option is to consider our variflow teat which have an X cut at the end so your baby can dictate flow rate. Most babies will let you know in their own way when they’re ready to feed more quickly.
How long do teats last?
Our bottles will last as long as your baby needs them, but teats take a little more hammering, and should be changed regularly if you can. We suggest about every 8-weeks for variflow and every 12-weeks for Easi-Vent and Ultra teats.
Learn more with our Tommee Tippee Product Support Videos.
Please click on the link below and download the Ultra Bottle & Teat Product Manual.